background image

Page   6

 

MOCET IP3032-E Standard IP Deskphone Quick User Guide

 

 

(2) If your Ethernet Switch doesn’t support PoE: 

-

  Please connect an Ethernet cable to the Switch port from 

 LAN port of the 

IP3032-E.

 

-  Plug in the IP3032-E power adaptor* to the wall power outlet then plug the barrel 

plug to the power port 

  on the back of the phone. You should see the phone 

LEDs and buttons light up momentarily and the phone will boot. 

 

 

 

To eliminate the requirement for multiple Ethernet cables to an user’s location, the user’s 
computer can be connected to the network through the second Ethernet port    on the 
IP3032-E.  

 

 

Notice :   

1.  The IP3032-E takes just under two minutes to start up and becomes operational. 

There are a series of LED and buttons that will light up periodically to provide boot 
progress information. Please be patient. 

2.  The IP3032-E does not ship with a power adapter. If you are not using Power over 

Ethernet (PoE), you must order the power adapter separately from MOCET.   

 

 

Do not use other power adapters. Use only the MOCET IP3032-E 
Power Adapter with your IP3032-E IP Phone. Adapters for other 
devices may damage IP3032-E IP Phone. 

 

CAUTION   

 

Содержание IP3032-E


















Отзывы: