Compliance
Statements
Compliance
Statements
FCC Statements
FCC Statements
IC Statements
This device complies with Industry Canada license-
exempt RSS standard(s).Operation is subject to the
following two conditions:(1) This device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS
exemptes de licence standard(s).Son fonctionnement
est soumis aux deux conditions suivantes:
(1) cet appareil ne peut pas provoquer d'interférences,
et (2) cet appareil doit accepter toute interférence,
y compris celles pouvant causer un mauvais
fonctionnement de l'appareil.
The SAR limit of USA (FCC/IC) is 1.6 W/kg averaged
over 1 gram of tissue for use against the head and 4.0
W/kg averaged over 10 grams of tissue for use on
the wrist.
NOTE: This product has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment
and receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV
technician for help.
