USER MANUAL | M1000-M-DA3
USER MANUAL | M1000-M-DA3
Please refer to the individual install notes for each vehicle
type at
www.mobridge.us/products/da3-dsp-professional
Saving Setups & Presets
The DA will automatically save setups upon a shutdown
of the MOST system. This needs to happen ‘gracefully’
as the user cannot just pull power from the unit as this
will not work.
The DA3 has four different presets and these can be
individually tuned. The presets can be triggered from
the vehicles radio, as shown in FIG 07. The channel
mapping will remain across all four presets and will
also apply default filter setups to the speakers to avoid
speaker damage.
You can save a backup of all of your Presets by simply
clicking the ‘File Button’ on the top menu and then
‘Save As’. This will save a backup of your setup across
all four presets, and this file can be used at a later date
to load in saved settings.
FIG 08
Saving Tuned Settings | Source Gain Adjustment
CHANNEL EQ
CONNECTED
0.00Hz
Default
Preset 01
1
2
3
4
5
DELETE
CLEAR
FREQ
0.00Hz
0.00Hz
MAG
0.00Hz
0.00dB
MASTER GAIN
0.00Hz
0.00dB
Q-FACTOR
0.00H
0.01
0.00Hz
0.01
Q-L/R
CONFIGURATION
12dB
50Hz
100Hz
500Hz
1KHz
10KHz
5KHz
20KHz
6dB
0dB
-6dB
-12dB
-18dB
-24dB
File
TIME ALIGNMENT & TESTING
Input Mapping
Left
Right
FRONT LEFT TWEETER
CONFIGURE OUTPUT
GAIN ADJUSTMENT
Source Select
MOST
Vechicle Select
Mercedes NTG2.5/4
Configure Outputs
Output Channel 1
Chime Gain
PDC Gain
0.00Hz
-4dB
0.00Hz
OdB
Telephone Gain
Navigation Gain
0.00Hz
OdB
0.00Hz
OdB
Front Left Tweeter
Mute
0.00Hz
0.00ms
0.00Hz
0.00ms
Mute
Front Right Tweeter
0.00Hz
0.00ms
0.00Hz
0.00ms
Mute
Rear Left Tweeter
0.00Hz
0.00ms
0.00Hz
0.00ms
Mute
0.00Hz
0.00ms
0.00Hz
0.00ms
0.00Hz
0.00ms
0.00Hz
0.00ms
Mute
Front Left Full Range
0.00Hz
0.00ms
0.00Hz
0.00ms
0.00Hz
0.00ms
0.00Hz
0.00ms
Mute
Left Left Woofer
0.00Hz
0.00ms
0.00Hz
0.00ms
0.00Hz
0.00ms
0.00Hz
0.00ms
Mute
Rear Right Tweeter
0.00Hz
0.00ms
0.00Hz
0.00ms
0.00Hz
0.00ms
0.00Hz
0.00ms
Left Sub Woofer
New
Save
Save As
Open
Fullscreen On
Exit
FIGURE 08
In FIG 08 we can see
the user has selected
to save the file by
selecting the ‘File’ menu
at which point the user
can save the tuning
session as a *.rax file.
You can also see in the
FIG 08 that the user
was currently tuning
preset 1.
PAGE 16
PAGE 15
SAVE AS
PRESET
NUMBER
GAIN ADJUSTMENT
FIG 07
Triggering presets from the vehicles radio
Memory
Waveband
Tuning
Sound
Radio MW
DSP
GALA
DRIVER
Sound focus
SYMMETRIC
11:33
Source Gain Adjustment
The DA3 has the ability to adjust individual sources for
the following, as shown in FIG 08:
Telephone
Navigation
Reverse Parking Sensors (PDC)
Chimes
Volume levels do vary from vehicle to vehicle. Should
the user require more gain on a particular source the
user can adjust the volume up as needed. Alternatively
should the user find some sources to loud such as
reverse park sensors, then the gain for this particular
source can be decreased.