MOBOTIX AG
Kaiserstrasse
D-67722 Langmeil
Tel.: +49 6302 9816-103
Fax: +49 6302 9816-190
www.mobotix.com
Declaration of Conformity: www.mobotix.com > Support > MxMedia Library > Certificates
MOBOTIX, the MX logo, MxControlCenter, MxEasy, MxPEG and MxActivitySensor are trademarks of
MOBOTIX AG registered in the European Union, the U.S.A., and other countries • Information subject to
change without notice • MOBOTIX does not assume any liability for technical or editorial errors or omissions
contained herein • All rights reserved • © MOBOTIX AG 2017
Drilling Template
130
mm/5.12
in
110
mm/4.33
in
100
mm/3.94
in
8.5
mm/
0.33
in
115 mm/4.53 in
100 mm/3.94 in
100 mm/3.94 in
ø 33.6 mm/1.32 in
Manuals and drilling templates:
www.mobotix.com > Support > Manuals > IP Camera Systems > Flex S26
Dimensions
115 mm/4.53 in
100 mm/3.94 in
M6
Ø 5.50 mm/0.22 in
130
mm/5.12
in
47.50
mm/1.87
in
100
mm/3.94
in
110
mm/4.33
in
8.50
mm/0.33
in
13.50 mm/0.53 in
33.50 mm/1.32 in
39.50 mm/1.56 in
48 mm/1.89 in
5 mm/
0.20 in
Important Notes
Safety Warnings
Notes on Installing:
• This product must not be used in locations exposed to
the dangers of explosion.
• Make sure that you install this product as outlined in
Chapter 2, «Installation» of the corresponding manual.
A faulty installation can damage the camera!
• When installing this product, make sure that you are only
using genuine MOBOTIX parts and MOBOTIX connection
cables.
• Only install this product on suitable, solid materials that
provide for a sturdy installation of the fixing elements
used.
Electrical installation: Electrical systems and equipment may
only be installed, modified and maintained by a qualified
electrician or under the direction and supervision of a qualified
electrician in accordance with the applicable electrical guide-
lines. Make sure to properly set up all electrical connections.
Electrical surges: MOBOTIX cameras are protected against
the effects of small electrical surges by numerous measures.
These measures, however, cannot prevent the camera from
being damaged when stronger electrical surges occur. Special
care should be taken when installing the camera outside of
buildings to ensure proper protection against
lightning, since
this also protects the building and the whole network infra-
structure.
Never touch the lens: Due to the high performance of the
S26, the area of the image sensor
can get quite hot, especially
when the ambient temperature is also high. This does not
affect the proper functioning of the camera in any way. For
this reason, the product must not be installed within the reach
of persons without dome.
Power off before opening the camera: Make sure the power
supply to the camera is disconnected before opening the camera
housing (e.g., when exchanging the SD card or when opening
the body to attach wires).
Network security: MOBOTIX products include all of the nec-
essary configuration options for operation in Ethernet net-
works in compliance with data protection laws. The operator
is responsible for the data protection concept across the entire
system. The basic settings required to prevent misuse can be
configured in the software and are password-protected. This
prevents unauthorized parties from accessing these settings.
Legal Notes
Legal aspects of video and sound recording: You must comply
with all data protection regulations for video and sound mon-
itoring when using MOBOTIX products. Depending on national
laws and the installation location of the S26, the recording of
video and sound data may be subject to special documentation
or it may be prohibited. All users of MOBOTIX products are
therefore required to familiarize themselves with all applicable
regulations and to comply with these laws. MOBOTIX AG is not
liable for any illegal use of its products.
Disposal
Electrical and electronic products contain many valuable
materials. For this reason, we recommend that you dispose
of MOBOTIX products at the end of their service life in accor-
dance with all legal requirements and regulations (or deposit
these products at a municipal collection center). MOBOTIX
products must not be disposed of in household waste! If the
product contains a battery, please dispose of the battery sep-
arately (the corresponding product manuals contain specific
directions if the product contains a battery).
Disclaimer
MOBOTIX AG does not assume any responsibility for damages,
which are the result of improper use or failure to comply to the
manuals or the applicable rules and regulations. Our
General
Terms and Conditions apply. You can download the current
version of the General Terms and Conditions from our web-
site at
www.mobotix.com by clicking on the COS link at the
bottom of every page.
§
§
Technical Specifications S26
Model Variants
Mx-S26A-6D016 (daylight image sensor, color)
Mx-S26A-6N016 (night image sensor, Black&White)
Lens Option
B016 (focal length 1.6 mm, f/2.0, image angle 180°x180°)
Sensitivity
• Color sensor (daylight): 0,1 lx @ 1/60s; 0,005 lx @ 1s
• Black&White sensor (night): 0,02 lx @ 1/60s; 0,001 lx @ 1s
Image Sensor
1/1.8“ CMOS, 6MP (3072x2048), Progressive Scan
Max. Image Size
6MP (3072x2048)
Image Formats
Freely configurable 4:3, 8:3, 16:9 or custom formats (image
cropping), e.g., 2592x1944 (5MP), 2048x1536 (QXGA), 1920x1080
(Full-HD), 1280x960 (MEGA)
Max. Frame Rate
• MxPEG: 42@HD(1280x720), 34@Full-HD, 24@QXGA, 15@5Mp,
12@6MP
• M-JPEG: 26@HD(1280x720), 13@Full-HD, 9@QXGA, 5@5Mp,
4@6MP
• H.264: 25@Full-HD, 20@QXGA
Video Codec
• MxPEG, M-JPEG, JPEG (max. output size 6MP)
• H.264 (max. output size QXGA, bandwidth limitation applicable)
DVR
• In the camera on MicroSD card (SDXC, SDHC pre-installed)
• External, on USB device
• External, on NAS
• Separate live image and full image recording – MxFFS with
archiving function
• Pre- and post-alarm images
• Automatic DVR monitoring with error notification
Software
MxManagementCenter
Image Processing
MxLEO, backlight compensation, automatic white balance, distor-
tion correction
PTZ
Digital pan/tilt/zoom, continuous up to 8X
Alarm/Events
Temperature sensor, shock detector (with firmware version 5.0.1
and higher), additional sensors/IOs via MxMessageSystem, notifica-
tion via e-mail, FTP, IP telephony (VoIP, SIP), visual/sound alarms,
pre- and post-alarm images
Intelligent Video
Analysis
MxActivitySensor, video motion analysis, MxAnalytics
Audio
• Ext. microphone/ext. speaker can be attached
• Lip-synchronous audio, audio recording
• VoIP/SIP telephony, intercom, remote controlling using key codes
Interfaces
Ethernet 100BaseT (MxRJ45), MiniUSB (MxMiniUSB), inputs/outputs
and RS232 via accessories
Security
User/group management, HTTPS/SSL, IP address filter, IEEE 802.1x,
intrusion detection, digital image signature, MxFFS
Certifications
EN55022:2010; EN55024:2010; EN50121-4:2006, EN61000-6-1:2007;
EN 61000-6-2:2005, EN61000-6-3:2007+A1:2011, EN61000-6-
4:2007+A1:2011, AS/ NZS CISPR22:2009+A1:2010, CFR47 FCC
part15B
Power Supply
Power over Ethernet IEEE 802.3af
Power Consumption
Typ. 3.3 W
Protection Classes
IP66
IK07
Ambient Temperature
–30 to 60 °C/–22 to 140 °F
Dimensions/Weight
Width x height x depth: 115 x 130 x 48 mm/4.53 x 5.12 x 1.89 in; weight:
approx. 457 g
Standard Delivery
Housing (high-resistance composite, PBT) white and base plate
aluminum blue anodized, shock-resistant dome for lens B016,
mounting supplies, mounting wrenches, 50 cm/20 in patch cable,
software, MicroSD card (SDXC, SDHC installed)
All manuals and user guides at all-guides.com