26
/44
User Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Preparing the Cavity Socket
can also be mounted to cavity walls (e.g., plasterboard
up to a thickness of 35 mm) using either the supplied cavity socket
or an existing socket. Push the cavity socket into the prepared
drill hole (68 mm) in the cavity wall and secure it by tightening
the clamp screws. The metal claws automatically pop out and
clamp the cavity socket firmly to the rear of the wall.
After connecting the two-wire cable, secure the housing
and circuit board directly to the cavity socket by fastening two
small screws (item 1.4) in the 12 o'clock and 6 o'clock positions.
This requires that the socket is properly installed in the wall.
Note
The supplied cavity socket ensures a convenient and secure installation along with a
very tight seal thanks to its soft rubber covers (for two-wire cables).
Attached to the socket
using two screws
(item 1.4)
When the screws are
tightened, the metal
claws automatically pop
out and clamp the socket
to the cavity wall (made
of wood or plasterboard,
for example)
