Mobotix MOVE NVR-8, Быстрая установка

Страница: 17 / 25

Logout
To log out, click on the username and select LogOut .
Power Off the NVR
1. Click Power icon
at the top-right corner of the monitor, and the Power Panel will show up.
2. Click Power Off icon
, and the NVR system will start the shutdown procedure.
3. Otherwise, click Cancel icon
to abort.
Note
Do not remove the power source until the NVR is completely off.
Function Tabs
There are six function tabs including Live View , Playback / Export , Add Device , Record , Setup and Log .
n
Live View : This function tab allows users to watch the live view of the connected IP devices and con-
figure camera settings, such as PTZ control, image setup, video format, motion detection setup, etc.
n
Playback / Export : Users can playback / export the recorded videos filtered by time / event and
review / export the saved snapshots.
n
Add Device : Users can search and add the IP devices to the NVR via network and through PoE ports.
n
Record : The Record function tab allows users to arrange recording schedule, configure circular record-
ing, and setup alarm behavior configuration.
n
Setup : Under Setup function tab, users can setup the basic NVR settings, such as language, factory
default, date / time setup, network setup, storage setup, user account management, etc.
n
Log : The NVR divides the log data into four categories, User Operation Log, IP Camera Event, VA Detec-
ted Event and PoE Switch Event. Users can view, search and export the log data under this function
tab.
Configuration
Function Tabs
9 / 17