84
/140
D25M Camera Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
2.7.3 Mounting To A Wall Or Building Corner
Use the supplied screw anchors, screws and washers to affix the Corner and Pole Mount
to a building corner.
• Mark the
four screw anchor holes
on the corner of the
building, ensuring that the arrows on the mount point
upwards. Drill the holes with a 10 mm wall drill.
• Pass the on-site network cable through one of the large
round holes at the back of the Corner and Pole Mount,
then through one of the 16 mm diameter holes on the
front of the mount. In order to properly protect the
cabling, you should let the cabling run from the inside
of the building through the Corner and Pole Mount
directly into the camera (concealed cabling).
Note: The
cable length from the building corner should be at
least 80 cm!
• Place the included
wall anchors
in the drilled holes
and screw the Corner and Pole Mount into place on
the corner of the building using the Torx screws and
washers. Use the supplied drilling template (fold-out
at the end of this manual) to mark the exact positions
for the drill holes.
Содержание D25M
Страница 9: ...9 140 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com ...
Страница 137: ...137 140 Additional Notes MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes ...
Страница 138: ...138 140 D25M Camera Manual MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes ...
