Q
The screen is invisible.
A
First of all, you should check if the PC camera is properly
connected to PC through USB port. If everything is ok, please
refer to the below mentioned procedure;
Windows98/98SE/ME Start
⇒
Settings
⇒
Control Panel
⇒
System
⇒
Device Manger
Windows2000 Start
⇒
Settings
⇒
Control Panel
⇒
System
⇒
Hardware
⇒
Device Manager
WindowsXP Start
⇒
Control Panel
⇒
Switch to Classic View
⇒
System
⇒
Hardware
⇒
Device Manager
1. In case that driver is installed at the imaging device.
a. You should open the imaging device to check if the camera
name is properly displayed.
b. Please check if there is yellow exclamation mark.
c. If there is yellow exclamation mark, please remove the
driver and reinstall it.
2. In case that driver is not installed at the imaging device and
other unknown device is installed
a. Please remove the unknown device or others.
b. Then remove the driver and reinstall it.
3. In case that imaging device is not displayed.
a. Please Check if Universal Serial Controller is at Device
Manager.
b. In case that it is not installed.
You should turn on USB device at BIOS.
c. In case that it is installed, Please try to use another
port.
If it still doesn’t work even though you try above
mentioned instructions, PC camera may be out of order. Please
contact with the distributor or head office of MTP
•
In case that you have used other PC
camera, you should get rid of its driver
before you install WebCAMeye Light PC
camera driver.
• A/S
Company : Mobitechplus Inc.
Address : #203, 32-5, Songwol-Dong, Jongno-
Gu, Seoul, Korea
Tel. : 82-2-730–3722
Fax. : 82-2-730-3726
34