Mobily BB@work NTC-30 Series, Руководство по установке, Страница: 6 / 29

5
Powering your Router
The Outdoor Router can be powered via DC power supply or Power over Ethernet (PoE). The DC power
supply has been included in theis box. The PoE kit is an accessory for powering with the optional PoE kit,
please see the appendix at the back of this QSG.
DC power option
Your router is provided with a waterproof DC jack allowing it to be powered by a 9~28V DC power supply.
1. On the bottom interface panel of the router, locate the DC power port and unscrew the protective cap to
expose the connection pins.
2. Connect the DC power jack as shown below to the DC power port of the Router and turn the metal
securing ring clockwise while pushing the conector in to secure the DC jack in position.
3. At the other end of the cable, wire the red (po) and black (grounding) wires to your 9~28V DC
power supply source.
Power
1
2
PIN SIGNAL DESCRIPTION
1 V+
2 GND Ground