PACKAGE CONTENTS
The package contains the following items:
• COSMO | HCT remote control
• USB cable - micro USB,
• 3 AAA batteries in the remote control protected with a seal from discharging,
• user manual,
• Wall bracket with a magnet and fixing pins (2 pcs.)
SPECIFICATIONS
• Supports up to 24 channels.
• Supports 12 channel groups.
• Supply voltage 4.5 V DC.
.•
• Power source: 3 x AAA LR03 or 3 x AAA batteries.
• Operating temperature [° C]: 40° C.
• Display: colour LCD screen with a resolution of 240 x 320 px.
• Communication band: [MHz] - 868 MHz..
• Communication range [m] - open space: 100m for interiors: 25 m
• [measurement through 2 walls; the presence of electromagnetic interference, the
presence of other radio equipment, installation on metal and low battery level can
significantly reduce the communication range].
• Weight of remote control with batteries [g] - 128 g
• Remote control dimensions (without bracket): 52 x 20 x 180 mm.
BRACKET INSTALLATION
Elements of wall bracket:
• Transparent bracket-
A
,
• Cap for mounting screws -
B
,
• Studs with screws -
C
.
1. Chose a place on the wall, where the bracket will
be located (easy access, lack of running power
cables, pipes, reinforcement of walls, etc.).
2. Mark a points on the wall so that the bracket
after installation will touch the wall and will be
perpendicular to the wall surface.
3. Drill holes and insert studs (distance between the
holes 20 mm, diameter 4 mm).
4. Place the bracket and tighten to the wall.
5. Put masking cover on.
POWER SUPPLY
The device is powered by three AAA batteries or three
AAA rechargeable batteries. The device automatically
switches off the display to save the power. The icon in
the top of the display indicates low battery level.
When charging the battery icon changes colour
periodically [green, grey]. The remote control has a
built-in protection and prevents charging of non-
rechargeable batteries.
- Fully charged battery.
- Low battery. Replace with new batteries or
when supplied with rechargeable batteries- connect
remote control to the USB port (charger, computer,
etc.) to charge the device.
INITIAL START-UP
1. Open the battery cap.
2. Remove the „P” seal that protects batteries from
discharging (marked with green).
3. Remote control display will start.
4. SETUP WIZARD
starts - configure additional
parameters necessary for proper operation of
remote control.
B
A
+ - +
C
P
3
