MOBILUS COSMO | HB Lite, Руководство пользователя

Страница: 6 / 8

9. CHANGE OF MOTOR’S OPERATION DIRECTION
a c b
P2 P1
WARNING ! You can change the direction of the work of motor for MOBILUS drives with
electronic limit switches only before setting the upper and lower limit switches. You can change
the direction of work for the MOBILUS motors with mechanical limit switches at any time.
After loading the remote control to the motor check that the buttons UP and DOWN correspond
to lifting and lowering the blinds. If not, press buttons P2 and hold them for about 4 seconds on
the remote control any loaded to the motor. The confirmation of correctly performed operation
are micro-movements of the driver.
10. TRANSMISSION PROTOCOL SWITCHING COSMO - COSMO | 2WAY
Remote control COSMO | HB Lite works in latest version of radio communication COSMO | 2WAY
ready. If you need to change the mode to an older version (for example, if you purchase a new
remote control for older COSMO radio tubular motors), follow these instructions:
1. Activate the remote control with the / buttons.
2. Press and hold the P1 + P2 function buttons on the back of the controller for 20 seconds at the
same time -
Fig. 10
.
3. When the LEDs at the bottom of the front panel light up, the corresponding communication
standard is activated:
colour red - the latest radio communication COSMO | 2WAY READY
blue colour - previous communication COSMO
Fig. 10
P2 P1
> 20 s.
11. CHECK THE ACTIVE COMMUNICATION MODE
To quickly identify the active communication mode:
1. Activate the remote control with the / buttons.
2. Press and hold the STOP button for about 5 seconds -
Fig. 11
.
3. The LEDs in the lower part of the front panel shall light up indicating:
colour red - the latest radio communication COSMO | 2WAY READY
blue colour - previous communication COSMO
Fig.11
> 5 s.