MOBILUS C-AR, Руководство пользователя

Страница: 4 / 8

5. INSTALLATION OF THE DEVICE
1. Make sure that the mains voltage is disconnected.
2. Connect the MOBILUS C-AR module as shown in
- Fig. 5.
3. Place the MOBILUS C-AR module in the electrical box or near the control panel.
4. Properly align the antenna (as far away as possible from metal elements).
5. Turn on the mains voltage.
Fig. 5
L1
N
230V~ 50Hz
L1 N
230V~ 50Hz
L1 N
230V~ 50Hz
L1 N
230V~ 50Hz
a b
L1 N
230V~ 50Hz
L1 N
230V~ 50Hz
a b
6. LOADING THE MOBILUS C-AR MODULE INTO THE RADIO ACTUATOR
1. Using a remote control MASTER enter the actuator to the programming mode.
1. On the remote control, press and hold simultaneously the STOP and UP buttons until the
drive of the actuator performs one sequence of micro movements down / up, confirming
entry in the PROGRAMMING MODE .
- Fig. 6a.
2. On the MOBILUS C-AR module briefly press the programming button - the actuator will
execute one sequence of micro moves down / up.
- Fig. 6b.
4