Zeus150
User Manual
V 1.1.5 - 21/10/2020
Page 6 of 16
2.1 Main Menu - Home
The Home Menu is shown in the following picture.
This menu shows the status of the system in terms of energy management. It clearly indicates
which energy source is charging which type of battery. It shows the actual mode of operation
(manual or automatic) the charge level of the batteries, the status of the timers, the activation or
not of the
"High-Mountain" function and the possible forced recharging for the engine battery.
General notes:
➢
The Mode can have three settings:
o
: optimizes the operation keeping the background noise low
o
: optimizes the production of electricity, consumption and noise
o
: for maximum electricity production
Note
: Full-Eco and Eco-Silent steps may take a few minutes, due to the need to dissipate
excess heat compared to the mode chosen. It is therefore recommended to select the
desired mode within the first 5 minutes after switching on. on.
➢
The operating mode icon can have the following forms:
o
Automatic mode; the icon flashes when the generator is working
o
Manual mode; generator active
o
Manual mode; generator not active
➢
The solar panel icon will be on only if the solar panel is charging
➢
The blue arrows with a continuous line indicate which of the energy sources is in
operation and which of the batteries is being charged
➢
For both batteries the percentage of remaining charge is displayed
➢
Timer icons are displayed only if the related timers have been set. Available only in
automatic mode, the icons can have the following colors:
o
Blue: timer set and active
o
White: timer set but not active
Automatic/Manuale
mode
Solar
panel
management
Thermoelectric
generator
management
termoelettrico
are
Primary
battery
management
Engine
battery
management
Setup Menu
Timer2
Timer1
Battery
actually
charged
Active energy
source
Engine
battery
forcing
Eco/Full/Silent
Mode
