The BAT devices
How to turn on the BAT?
•
If the battery is not empty, the BAT device will be always on and transmitting
messages to the cloud according to the intervals.
Steps to insert SIM card
•
Unscrew the back cover of the BAT.
•
Unplug the battery cable to open the SIM slot.
•
Insert 3FF SIM cards into the device.
•
Plug the battery cable back to the connector.
•
Put the back cover to BAT.
The BAT reporting profile (Current firmware: v2.0.0.B407)
•
The current firmware will take a reading of all sensors and then make a cellular
broadcast to the Fusion platform once every 12 hours.
•
User can turn on the Vibration detection on the Fusion platform (see below).
When the BAT is moving, the reporting interval will change to every 5 minutes.
If the BAT is not moving for another 15 minutes, the BAT will switch back to 12-
hour reporting interval.
•
If the USB charging cable is plugged, the BAT will wake up. The BAT will not go
to the sleep mode while charging. This allows users to easily debug or change
settings.
