![Mobilogix ATD600S Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/mobilogix/atd600s/atd600s_user-manual_1815776009.webp)
9
{"ts":1615269209136,"values":{"ET":"LD","SN":"A600S20500029H","IMEI":"864475040056136","IMSI":"460044
339301547","IPW":3979,"SS":0,"CS":"LTE Cat NB1","OP":"CHINA
MOBILE","LAC":"","CI":"","GFT":0,"LAT":22.576006,"LONG":114.054672,"Heading":240,"Altitude":157.000000,"
HDOP":1.230000,"NoS":5,"GFS":1}}
3.3
Data report
3.3.1
When to report data
After setting the sampleCount(default 4,
report sample data after sample a certain number of times
) and sample
frequent(default 4(h),
), every (sampleCount)*( sample frequent) hours will try to report
data to cloud.
Notice:
1.
sample frequent should be more than 4 and report period should be less than or equal to 24h.
2.
Report data can be configured by
report sample data after sample a certain number of times
3.
When
you press button for two times, device will report “BP” message, then sample and report beacons
data
3.4
alarm
3.4.1
UAM alarm
UAM is a key feature for our device, when shake device, once reach the threshold (
default is
20,
default is 5), device will report UAM once and report location data once.
Notice:
1.
UAM alarm can be configured by
UAM Alarm En-Disable, UAM shake Value, UAMAlarm shake number
2.
UAM alarm is disabled by default.
3.
Data format:
{"ts":1615278226096,"values":{"ET":"UAM","SN":"A600S20500002H","IMEI":"865284046405886","IMSI":"4600
46260108483","IPW":3559,"SS":0,"CS":"GSM","OP":"CHINA MOBILE
CMCC","LAC":"25F0","CI":"DDF","GFT":0,"LAT":0.000000,"LONG":0.000000,"Heading":0,"Altitude":0.000000,"H
DOP":0.000000,"NoS":0,"GFS":0}}
3.4.2
Low Battery alarm
If internal power lower than 33
00mv, device will report “Low internal battery” to server.
Notice:
1.
Low Battery alarm can be configured by
bat alarm endisable, bat alarm valu
2.
Low Battery alarm is disabled by default.
3.
Data format:
{"ts":1577836861040,"values":{"ET":"IBL","SN":"A600S20500002H","IMEI":"865284046405886","IMSI":"460046
260108483","IPW":3555,"SS":0,"CS":"GSM","OP":"CHINA MOBILE
Содержание ATD600S
