Mobility Works Buffalo, Руководство пользователя

Страница: 15 / 25

Attention
：
1. Do not push both RH & LH sides of the wigwag paddle simultaneously. This might
leave you unable to control your scooter.
2. Do not turn the power switch to OFF whilst driving as this will lead to an emergency
stop and possible risk of accident and injury.
3. Do not set to the highest speeds whilst driving indoors.
4. Do not adjust the speed dial whilst driving, a sudden change in speed may cause
danger to you and others, and may cause damage to your scooter.
5. Do not place magnetic devices near the scooter controller as this could affect the safe
operation of your scooter. The scooter controller is located under the footwell.
6. Do be careful whilst driving in heavy traffic or crowded areas.
7. Whilst reversing the vehicle, beware of people or objects behind you.


Stopping
1. Release the wigwag paddle completely. The vehicle will naturally brake and stop.
2. Turn the scooter off at the key ignition. Then pull out the key.
Attention
：

The stopping distance will vary with your forward / reverse speed. Therefore please
begin braking as early as you can.

When parking your scooter, be sure to park on flat ground and then turn the power to
“OFF” before you dismount.
Main Circuit Breaker (Reset Button)
When the voltage in your scooter’s batteries becomes low or the scooter is heavily strained because of
excessive loads or steep inclines, the main circuit breaker may trip to protect the motor and electronics from
damage.