3
How to use BTH-510-R5W5
PIO state
statement
Power Switch on
Device on
Power Switch off
Device off
Long press answer key 3 seconds
when power on
Enter pairing mode
BTH-510 State and LED Flashing Pattern
LED state
statement
Blue led
on : 2 sec , off : 1 sec , repeat
All profiles are standby but not connected with
any Bluetooth device yet.
Blue led
flash every 2 sec
HFP is connected.
Blue led
on : 1 sec , off : 1 sec , repeat
On active call state.
Blue led
and
red led
flash alternative repeat
Enter pairing mode.
Red led
On
Battery Charging
Red led
Off
Battery Full
How to pair BTH-510
Power on BTH-510
Press Pairing button for 3s until the Blue/Red LED flashes
Power on your Bluetooth radio or dongle and get it into pairing mode.
After BTH-510 paired
Power on PTT-Z and press the PTT
The PTT-Z will be paired
After all paired it’s good to go
If you have pairing issue please visit our Youtube channel
