Mobility Sound BTH-300-AZ, Быстрый старт

Страница: 3 / 6

3
BTH-300-AZ
BTH-300-AZ State and LED Flashing Pattern
BTH-300 linked with cell phone
Standby 3 flashes per 3 second Standby
Press Talk/ END key when
there is no incoming call <Nil> If paired with iPhone, this will
start/stop the music playing
Press PTT button ONE flash per second Adjust the music volume of
smart phone
Music playing, double press
the volume keys No LED ON Skip to Next/Previous track
Linked with smart phone,
press TALK/END key when a
incoming call ONE Blue LED flashes per second Will pickup/End the call, the
music will stop during the call
and resume when call ends
During the call, press volume
keys <Nil> Adjust the speaker volume of
the cell phone
Standby mode, double press
TALK/End key <Nil> Redial last number
Charging BTH-300-AZ
During charging Red LED continuous ON <Nil>
Charging complete No LED ON <Nil>
Low battery Red LED flashes once every 6
seconds With beep sound every 6
seconds
Volume Adjustment
Volume UP <Nil> 5 steps in volume adjust,
when reach the max
volume, a long beep is
heard
Volume down <Nil> 5 steps, when reach the min
volume(Mute), a short
beeps is heard
Earphone
When a 3-pole earphone is plugged, only speaker is switched to the earpiece, need to use
BTH-300 built-in Microphone to talk
When a 4-pole iPhone standard earphone is plugged, both speaker and microphone are
switched to the earpiece, BTH-300 built-in microphone will not work.