Use the walker only once it is fully assembled
and in the deployed and locked position! Make sure
before use that the product is in perfect condition! Do not
use the walker if it has visible damage, or if there is a
suspicion that it may be damaged!
1. Remove the packing material
2. Remove the chassis and deposit the walker in front of
you, lower the seat.
3. Deploy the structure of the walker and place it on the
floor.
4. Mount the tubes of the front and rear legs into the
structure by pressing inwards.
Since this model has double independent regulation of
height of seat and height of cuffs, regulate the wheels
and / or legs in relation to the height to which the seat
wishes.
5.Place the handle and set it to the proper height, and
secure with the handles.
6.Place the backrest into the structure by pressing on the
tubes.
7.Place the basket in the structure. And the assembly is
over.
MOUNTING AND
ADJUSTMENTS MOUNTING
OBSERVATION!
Adjust the handles on both sides to the correct height,
using the knobs. Position the walker in the direction of
travel and place the arms horizontally. The handles
should be at the level of the wrist.
The height of the handle can be adjusted through the
four holes. To adjust the height, loosen and remove the
screws on both sides and adjust the bar to the desired
height. Fasten both screws into the proper hole.
HANDLE ADJUSTMENT
OBSERVATION!
