19
nOTe:
The Mobileye C2-270 identifies day and night conditions and automatically
switches between ‘Day’ and ‘Night’ modes. Each mode has its own independent
luminance level that can be configured separately. The system saves the latest
luminance settings for both ‘Day’ and ‘Night’ modes until they are changed, or
until reset to factory defaults.
10.1.3. Setting HMW alert Timing
By default, the HMW audio alert is sounded when headway is less than 0.6 seconds. If
you wish to have the audio warning sounded earlier (at a greater headway distance),
or later (at a shorter headway), the HMW audio alert timing can be changed to a value
between 0.1 and 2.5 seconds.
WaRnInG!
Do not change Mobileye C2-270 settings while driving.
To set HMW audio alerts timing perform the following steps:
1. Press the (
) button twice. This will change the system mode to "HMW
Configuration" mode. This mode will be indicated by a very slow flashing red car
icon (dim inn and dim out) and the HW warning level should be displayed by the
seven segments.
2. Press the “+” and “-” buttons to increase or decrease timing.
nOTe:
Increasing the timing means the HMW audio alert will be sounded while
your vehicle is at a greater distance from the vehicle ahead than when the default
settings are in effect. If you decrease the timing, the alert will be activated when
your car is relatively close to the vehicle ahead. For example, setting the HMW
audio alert value to 1.2 seconds will cause the system to sound a warning when
headway reaches 1.2 headway seconds or less.
CaUTIOnS:
Setting the Headway Monitoring Warning to a low value will generate
an alert only when you are very close to the vehicle ahead
