Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Control upon delivery
After unpacking the rollator please check if all parts shown in the drawing have been delivered. If any parts are
missing please contact your dealer immediately.
Unfolding the rollator
•
To be able to unfold the walker, the black locking fuse must be secured by tilting it off one of
the pipes.
•
Press down both tubes under the seat until the frame unfolds and you can hear a "click". Now
the locking device is in a fixed position.
•
To be sure that the frame has been fully unfolded check that it is probably locked.
•
Attach the strap which connects both push handles (see photo at the right). When the rollator has been
unfolded, you must check that the strap is blocked.
•
Check that the levers for height adjustment have been firmly tightened.
•
Check that both handles are at the same height and stable.
Use of a defective rollator is strictly forbidden.
Always check before use the function of all parts of the rollator. If the above recommendations are not
followed, injuries may occur.
Folding the rollator
•
Pull the strap at the seat until the frame folds together.
•
Now the rollator is folded together.
Height adjustment of push handles
•
Unfold the rollator
•
Press the adjustment button.
•
Adjust the height
•
Make sure that the adjustment button pops out again.
•
Make sure both push handles are adjusted in the same height.
Adjust the height of the push handles so that the handles are at wrist height when the user stands next to
the rollator with arms vertically downwards. This means that the arms have an angle of 20°- 30° when using
the rollator.
Rev. 11.04.22
14 - 28
UM-318001-318002-MULTI-11042022.odt
Wheels
Shopping bag
Seat
Folding strap
(
pull here to
fold the rollator
)
Push handles
Tube under seat
(seat comes up when
you press from both
sides)
Brake handle
Lever for height
adjustment of
push handles
Breaks
