Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Mounting the seat on the wall.
The wall mounted shower seat must be mounted by a competent person.
No fxing accessories are supplied.
The choice of fastening material depends on the condition and types of the wall.
Select six bolts, washers, and wall plugs.
Use the mounting plate to mark the position of the six holes.
Ensure horizontal alignment.
Drill the holes and insert the wall plugs.
Place the bracket in the recess between mounting plate and wall.
Screw the mounting holder tight.
Make sure that wall mounted shower seat is correctly mounted. To do so fold the wall
mounted seat up and down several times .
Usage Description
When folding and unfolding the wall mounted shower seat the user must take care not to squeeze
the fngers or other body parts.
Don’t burden the seat surface on one side.
Grasp the seat at the seat surface as far to the front as possible to fold the seat down.
When the seat is pulled down the support legs fall automatically to the foor.
Sit down in the middle of the seat surface.
After use, move seat up until the seat will be in the upper holding position.
Transport recommendations
The device is dedicated to the place of assembly and should not be transported.
Accessories
There are no accessories provided for the device
4. Technical data
Mobilex Bathseat
302040
Overall width
45 cm
Overall length
45,5 cm
Seat width
44 cm
Seat depth
37 cm
Adjustable seat height
43.5 cm – 51 cm, 2.5 cm increments
Weight of the product
3,5 kg
Maximum load
100 kg
Packing dimensions (2 pieces)
59 x 13 x 48 cm
Product label
The product label is located on the bottom of the device
Image of the product label (not original)
Rev. 12/17
Page 3 of 4
UM-302040-GB
MOBILEX A/S
Grønlandsvej 5
DK - 8660 Skanderborg
Tel: +45 87 93 22 20
www.mobilex.dk
Wall mounted
shower chair
Max. 100 kg
Produced
Serial no.
