5
IMPORTANT: If the pairing cannot be completed within 2 minutes, the Car Kit’s LED will flash off
and the Car Kit will go into standby mode. Please repeat steps 2 to 7 to pair the speakerphone and
mobile handset again.
Connection/Link to a Mobile Handset
Once pairing is complete, the car kit will be in standby mode. Before you place or answer a call, if the
connection icon is not shown on phone screen, follow these steps to activate the Bluetooth connec-
tion/link from your handset to the car kit until the connection icon is on the screen.
1. On Handset: Select “BT-HFKP5” from the paired list on your handset screen.
2. On Car Kit: Press multi-function button and select “Accept” on handset screen to accept connection.
Some mobile handsets may automatically connect.
IMPORTANT: Whenever the Bluetooth connection/link is removed and you cannot see the connection
icon on the phone screen, you must reconnect by following the above directions.
Disconnection from the Mobile Handset
To disconnect your mobile handset from the Car Kit or to Pair/Connect another Bluetooth handset, fol-
low these directions.
1. Power off the Car Kit.
2. Select “disconnect” to remove previous connection from your handset list.
3. Follow pairing directions to pair another Bluetooth-enabled handset.
Using the Car Kit
Once pairing is complete and the battery is fully charged, you may access the following functions.
Some of the below-mentioned functions are only accessible for handsets supported with Hands-Free
Profile.
Answering a Call:
To answer a call, quickly press the multi-function button, the Car Kit will beep.
Ending a Call:
To end a call, quickly press the multi-function button, the Car Kit will beep.
Reject a Call:
Press and hold the multi-function button for 3 seconds, the Car Kit will beep.
Voice Dialing:
When the Car Kit is in Standby mode, press the multi-function button until it beeps and say the voice
tag.
NOTE: The Voice Dialing function only works on voice-dialing enabled phones.
IMPORTANT: Voice tags must be prerecorded into your mobile handset in order to use this function.
This function is only applicable to mobile handsets with a Bluetooth Hands-Free Profile. Refer to
your mobile handset's user manual for additional information.
Last Number Re-Dialing:
When the Car Kit is in Standby Mode, press the multi-function button twice.
Adjusting the Volume:
Turn the volume dial until the desired volume level is reached.
Operation Instructions
(Continued)
All manuals and user guides at all-guides.com
