TESTING
If you have not set up your system...
1
2
3
4
Press and hold the test button
Press the emergency button
or pendant
The ase tation will announce,
“Test Call
sent to Emergency Response Center ”
The obile evice will announce, “Call in
Progress.”
Always have your Mobile Device nearby when testing your system. It is possible that the
Mobile Device will go to a live operator. If the operator speaks to you, please advise them
that you are testing your system. If you do not explain to the operator that you are okay and
that you are testing, EMS may be contacted.
If the test was successful…
The ase tation and obile evice will
announce,
“Thank you for testing your device ”
Volume:
70°F
Next, be sure to test your system...
see Testing page.
see Setup page first.
Com
plete Protection System
Includes the cellular Base Station, a
obile evice, a neck pendant or
wrist button, a cradle charger and a
mobile case
P
lug the power cords into
electrical outlets
Model Number: CBS4-01
Manufactured For MobileHelp
Made in Malaysia
FCC ID: PXTCBS4-01
IC ID: 10876A-CBS401
CAN ICES-3(B)/NMB-3(B)
This product contains;
Module FCC ID:XPY1EHQ24NN
Module IC ID: 8595A-1EHQ24NN
(01)00862262000453(11)170623(21)1234
ON/
Yellow
Light
OFF
Switch
If the test was unsuccessful…
The ase tation will announce,
“User
auto-test failed, please contact Customer
Support ”
Quick Start Guide
Quick Start Guide
1
2
Quick Start Guide CBS 4 MD 4 MHP-06776A_mech.indd 2
4/2/2019 11:29:49 AM
Turn on the ON/OFF switch on
the back of the Base Station
Complete Protection System
QUICK SETUP
Your System is “ACTIVE” and READY TO USE
PLEASE REFER TO THE CUSTOMER SERVICE NUMBER ON
THE INSERT THAT CAME WITH THIS GUIDE FOR ANY
QUESTIONS OR CONCERNS.
The
Emergency
and
Reset
buttons
will light up in 10 seconds and the
display screen will turn on. If the ase tation is set up correctly and connects to the cellular
network, it will say “system ready” within 60 seconds.
You can use the volume control
(+ or -) on the front of the unit under the display screen
if the voice is too loud or too soft.
The yellow light on the front of the
Cradle Charger will illuminate
SRDR-00018 Rev. 2
SRDR-00018 Rev. 2
