Power Ratings Based on Fully Charged Battery and Ambient Temperature of 72
°
135°F
(57.2°C)
2.5Hrs.
100%
120°F
(48.8°C)
3Hrs.
75%
105°F
(40.5°C)
5Hrs.
50%
90°F
(32.3°C)
10Hrs.
25%
7.4volt Glove Heat Ratings
WWW.MOBILEWARMING.COM
Battery Installation
Use only
MWBT2
Batteries
2
3
Batteries placed on
inside of each side of cuff
Quick Start Guide
Fully Charge both batteries to 100%.
Unzip each glove pocket located on the cuff and plug battery(s) into the
glove’s wire harness. (See drawing)
Slide each side of the battery in it’s own pocket, one on top and one on
bottom; then close zipper. (See drawing)
Now that the batteries are connected to glove, press and hold the touch
control button on the gloves for a few seconds. Once it’s powered on LED
will be Red/100% heat.
After the glove is on, push the control button to reach your desired settings.
To power off gloves, press and hold the touch control button until light turns
off. If you plan to not use the gloves for more than a few days, unplug both
batteries from the gloves.
1-
2-
3-
4-
5-
6-
Do not use battery if you notice a
change of shape (lumps),
over-heating when charging or if
rust or corrosion on the battery
connectors is found.
