Bluetooth Barcode Scanner BS03-B
User’s Manual
4
/
9
Chapter II
Quick Guide
2.1 Connect with Bluetooth devices (HID and SIP supported)
1) Make sure that the device supports HID and SIP protocol;
2) With the scanner off, press and hold the trigger for 5 seconds till two beep tones sounded to
enter the configuration status.
3
）
Scan the “
DEL ALL CONNECTED MEMORY DATA
” barcode to clean up the old connection
records. This helps in making faster connection with new terminal devices;
DEL ALL CONNECTED MEMORY DATA
4) Scan the barcode below to specify a Bluetooth protocol for the scanner and the terminal device.
If the Bluetooth standard of the terminal device is less than 2.1, then only the SPP protocol could
be used. The pairing password is "0000";
HID COMMUNICATION MODE
SPP COMMUNICATION MODE
