Mobicom Telematics
–
G102 User Guide
10 / 18
Copyright ©
2018 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
7.3 LED light Indicators
Note:
To get a good effect of GPS signal in vehicle installation, please let the Internal
GPS antenna side face to SKY horizontally as below picture:
7.4 Initializing Device Parameters via SMS command
G102 can be configured via SMS. Refer to the command list as below:
No.
Function Name
SMS Command Content
Reponse from G102
Description
1
Set the authorized
SIM number
*SPJLX*P:753869*S:13012345678
,13112345678,13212345678,#
XXX,XXX,XXX, set ok
(max: 3 phone numbers)
2
Set server IP/Port
*SPJLX*P:753869*U:211.153.134.
122,6666,1,#
Reply content is “IP”
“Port”
, Server IP
Address:211.153.134.122 Port:6666
Transfer type: 0: UDP 1: TCP
Note:
Please get Server IP and Port from Mobicom
Technical support engineer.
3
Set APN
*SPJLX*P:753869*A:CMNET,USE
R,PWD#
if no user name and password.the SMS
is: *SPJLX*P:753869*A:CMNET,,#
LED Light
ON/OFF Indication
Description
Light On
Light Off
Green
Off
GPS valid, Position get fixed
Blinking every 1 sec
Searching GPS signal
Blinking every 0.5 sec
Initializing
Red
Blinking every 1sec
Searching for GPRS Network
Off
Connected to GPRS Network
