13
ES
Unpack the product and
lift the vertical posts in the
direction of the arrow A.
Step 1
Step 2
Attach the vertical posts with 2
M10 knobs on both sides.
Use a 6 mm wrench to fix the tray
holder with two M6x14 screws in
the position shown in the picture.
M6*14
4. ASSEMBLY
M10 Knob
Step 3
Step 4
In order for the moving wheel to
be visible, the belt must be in a
vertical position, as shown in the
picture on the left (position F).
To fold the product after use,
loosen the M10 knobs on both
sides of the vertical posts,
afterwards lift the machine in
the direction of the arrow D
until it’ s in a vertical position.
c
