ii
in the cell unit. This product should never
be placed near or over a radiator or heat
register. This product should not be placed
in a built-in installation unless proper
ventilation is provided.
7.
This product should be operated only from
the type of power source indicated on the
marking label.
8.
Do not allow anything to rest on the power
cord. Do not locate this product where the
cord will be damaged by persons walking
on it.
9.
Do not overload wall outlets and extension
cords, as this can result in the risk of fire
or electrical shock.
10.
Never push objects of any kind into this
product through the cell unit slots, as they
may touch dangerous voltage points or
short out parts that could result in a risk of
fire or electric shock.
11.
To reduce the risk of electric shock, do not
disassemble this product. Contact
qualified service personnel when some
service or repair work is required.
Opening or removing covers may expose
you to dangerous voltages or other risks.
Incorrect reassembly can cause electric
shock when the product is subsequently
used.
12.
Unplug this product from the wall outlet
and refer servicing to qualified service
personnel under the following conditions:
a.
When the power supply cord is
damaged or frayed.
b.
If liquid has been spilled into the
product.
c.
If the product has been exposed
to rain or water.
d.
If the product does not operate
normally when following the
operating instructions. Adjust
only those controls that are
covered by the operating
instructions. Improper
adjustment of other controls may