Mobeye CombiGuard CM4600, Руководство пользователя

Страница: 18 / 36

17
4.5 HOW TO ACTIVATE THE COMBIGUARD
After the previous steps the Mobeye CombiGuard is ready for use. It is
armed automatically.
In order to switch off (disarm) the Mobeye CombiGuard:
- Press the button at the backside for 1 second.
The green LED switches off to indicate the
disarmed status.
In the disarmed status the Mobeye
CombiGuard will not send alarm notifications.
The unit remains active and is able to switch
on time-controlled and to send test and 'low
battery voltage' messages.
In order to switch on (arm) the Mobeye CombiGuard:
- Press the button at the backside for 1 second. The green LED blinks once
every 3 seconds (battery-powered) or stays on continuously (in case of an
external power supply).
If powered externally (with network connection), switching can be done via
SMS commands:
SMS command to switch on: CODE ARM (e.g. 1111 ARM)
SMS command to switch off: CODE DISARM (e.g. 1111 DISARM)
To update the status in the Mobeye Internet Portal: press the button for 5
seconds, or - if the device is externally powered - send a question mark to
the unit (without code).
SMS command status update: ? The status in the portal including
the temperature and battery
value will be refreshed (only
possible with external power).