manualshive.com logo in svg

Mobeye CM2410, Руководство пользователя

Поделиться
Скачать
Mobeye CM2410 Скачать руководство пользователя страница 13

10 

5.  POSSIBLE SETTINGS 

The Mobeye  GSM fire  alarm communicator CM2410 has many setting options that 
influence the behaviour of the module. If  connected on the Mobeye Internet Portal, 
the settings are prepared in the portal (see chapter 4). If your own SIM card is used, 
programming is done via SMS commands (see chapter 4). 

5.1  ALARM PHONE NUMBERS 

In  the  event  of  an  alarm,  the  Mobeye  GSM  fire  alarm  communicator  CM2410  can 
call 5 telephone numbers (TEL1… TEL5). It is possible to confirm a call by picking 
up the telephone and pressing any key. The following numbers will not be called. 
When  using  your  own  SIM  card,  it  is  mandatory  to  set  at  least  one  number  (on 
TEL1). The TEL1 ... TEL5 are then used for telephone calls and / or text messages 
from the unit. 
This  is  not  mandatory  when  using  the  Mobeye  Internet  Portal.  If  no  telephone 
numbers  have  been  entered,  the  notifications  will  only  be  sent  to  the  portal  and 
forwarded by SMS and / or e-mail from there.  
Note: the (unlimited number of) contacts who receive SMS / e-mail may be different 
from the numbers programmed on TEL1 ... TEL5. 

5.2  CALL ON/OFF 

Even if the alarm telephone numbers are set in the options, the calling process can 
be  suppressed.  By  turning  off  the  CALL,  the  unit  will  only  send  the  notification  via 
textual messages. The default value is set to "ON". 

5.3  SMS ON/OFF 

This  setting  is  only  relevant  when  using  your  own  SIM  card:  the  Mobeye  GSM  fire 
alarm communicator CM2410 alerts after  an alarm on the inputs with a call and an 
SMS. It is possible to turn off the SMS (OFF). As a factory setting, the SMS is set to 
"ON". 

Содержание CM2410





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды