Mobeye argos i200, Руководство пользователя

Страница: 22 / 27

21
CODE COMMAND:OPTION
CODE
COMMAND
:
OPTION
#
COMMAND
:
OPTION
#
COMMAND
:
OPTION
12. PROGRAMMING VIA SMS TEXT MESSAGES
Almost all options can be set via the keypad. It is also possible to program by sending SMS commands to the SIM
cards
’ telephone number in the Mobeye Argos.
12.1 PROGRAM MODE
If the unit runs on external power, it is always in program mode, ready to receive SMS commands. For programming
a battery operated Mobeye Argos, first switch to the program mode::

Enter your 4-digit code

Press “menu” -> light turns green

Enter
“21”

Press “OK”
First the light flashes red (interval ca. 1 sec). As soon as the light turns green, the Mobeye Argos
is
able to receive SMS-messages.
After five minutes there is a time-out and a beep is heard. Leave the program mode earlier by
pressing “OK” twice.
12.2 HOW TO PROGRAM BY SMS
- Be sure the unit is in program mode
- Send an SMS message with following content:
- The CODE stands for the installation code. F
actory setting is “1111”.
- Do not forget the space between CODE and COMMAND.
- The complete scheme with SMS commands is listed chapter 13.
- The commands are case sensitive.
- Several commands may be combined in one SMS message (with a maximum of 160 characters) by placing a #
between the commands.
A confirmation melody is played to indicate a correct command. In the event of an incorrect command, a beep is
heard.
Examples (code is 1111):
To switch off exit indication
1111 EXITBEEP:OFF
To set the minimum temperature (lower limit) to 5 degrees:
1111 LTL:+05
Or: both commands in one message:
1111 EXITBEEP:OFF#LTL:+05