display. On the Cristalys Date clock, the [+] button enables you to scroll the character
table.
7.
Press [SELECT]. The Correction menu appears. This enables you to
correct the time base manually. On leaving the factory, the value of
the offset is 0. The value of this offset may vary (using the [+])
between -9s99 and +9s99 per 10ms step (#0.12 ppm). The addition
of this daily offset to the time base will be spread over 24 hours.
8.
Press [SELECT] again to exit the technician menu and return to the
time display.
Reminder
: At any time, holding down the [SELECT] button, then
pressing the [+] button quickly, goes to normal display mode and
exits the configuration menu.
If no buttons are pressed for 10 minutes, the clock returns automatically to time display
mode.
21
