Mobatime DTS 4128.timeserver, Инструкция по эксплуатации

Страница: 54 / 84

© MOBATIME 54 / 84 800847.08
7 Updates
7.1 Image- und Filenames
The Image files and the filenames are different for the two device versions:
File description DTS 4128 V1 DTS 4128 V2
Boot image dts4128u-boot.bin dts4128u-boot.imx
RootFS image dts4128rootfs.img dts4128rootfs.ubifs
Devicetree n/a dts4128devicetree.dtb
Kernel Image dts4128uImage26 dts4128zImage
Geräte-Applikation dts4128dtsapp.img dts4128app.ubifs
Geräte-Konfiguration dts4128dtscfg.img dts4128cfg.ubifs
Checksummen Datei dts4128check.md5 dts4128check.md5
7.2 Updating images with MOBA-NMS
Steps for updating images using MOBA-NMS:
1. Select DTS device(s) in the device view.
2.
Menu ‘Edit‘  ‘Commands‘  Select ‘Firmware Update…‘.
3.
Enter the path to the file ‘dtscheck.md5‘ or select it using the ‘Browse…‘ button.
4. En
ter further paths to images or select them using the ‘Browse…‘ button.
5.
Optionally: Check the box ‘Backup device(s) configuration before update‘ and enter
the destination directory for the backup file(s). If a destination folder is selected, the
whole device configuration will be saved before the backup. Additionally, if the
device configuration image is written too, the saved configuration can be
automatically restored after the update. For this, check the box ‘restore
configuration after update‘.
6. By clicki
ng the ‘OK‘ button, the update is initiated.
Caution:
The update procedure (item 6) can take some time (<5 min.) and may not
be interrupted under any circumstances. In case of an interruption, the
software on the DTS 4128 is destroyed and it can only be repaired in the
factory.
7.3 Updating images with FTP
I
mages according to table in chapter 7.1 Additionally the file dts4128check.md5 must
exist.

all file names are case-sensitive .
Steps for updating images:
1. Connect a FTP client software (binary format) to the DTS 4128 (e.g. with Internet
Explorer enter: ftp://dts@[IP address] ) (as user dts).
2. During an update of the device the configuration of DTS 4128 is overwritten. To save
existing configuration, save file
dts4128.conf / dtsdevice.conf
from directory /etc.
After updating, rewrite the file to DTS 4128 (see chapter 5.2 Updating applications or
configurations).
!