MOBA Farmpacker M100T, Руководство по обучению

Страница: 30 / 59

-
Release 5
30 Training manual , MOBA Farmpacker M100T
5.4 Update LUST program
For programming the Lust frequency converter the following components are needed, see fig. 19
- Lust programmer module,(2)
- Smartcard with program (1).
Procedure Update:
1. Put the Smartcard into the programmer module with the contacts backwards.
2. Put the programmer module on the Lust frequency converter (3).
3. Switch on the power.
4. Press button “stop/return” two times.
Now the display shows “MENU”.
5. Select ‘’CARD’’ with the arrow keys.
6. Press ‘’start/enter’’.
7. Select “READ” with the arrow keys.
8. Press ‘’start/enter’’ again.
Now the display shows “ALL”.
9. Press ‘’start/enter’’ again.
10.Wait until the program is loaded.
Now the display shows “READY”.
11. Switch off the power and unlock the programmer module.
This is done by pressing the button “PRESS” and pulling the module forward.
Fig. 19 - LUST Update
1
2
3