Mo-vis D-P012-62-70-M1-04 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 29

Mo-vis D-P012-62-70-M1-04 Скачать руководство пользователя страница 15

3

Slide the unit over the Q2M Rod (or any other 6 mm rod), to position the

Hand Warmer on the wheelchair.

You can use any other part of the Q2M system to complete the installation.

CAUTION:

Tighten the screws firmly, but not excessively. Excessive

force may damage the unit.

Connection

Place and connect the Hand Warmer extension lead with the Hand Warmer

connector and lead the XLR power cable to the power chair joystick module

or battery.
Secure the power cable to the wheelchair with straps or cable fasteners.

WARNING:

Protect the device against bumps. Mind damaging the

unit and wiring. Make sure that cabling is mounted in such a way that

excessive wear and tear is avoided.

WARNING:

The XLR power cable connector contains a fuse. Use an

adapter to connect to non-XLR power connections.

NOTE:

The XLR connector is internally fused with a fuse of 5A. This

is necessary because the wire gauge cannot carry more current.

Therefore, it is not allowed to cut the XLR connector and make a

14

14 Hand warmer Installation manual

«
...
13
14
15
16
17
...
»

Содержание D-P012-62-70-M1-04






























Отзывы:

Нет отзывов