10
INSTALLATION
The equipment is suitable for the external use because protected
against direct sprinkles (IPX4).
The equipment need a suitable installation before using it. It has been
designed to be fixed onto a plane wall with no obstacles at both sides
of the equipment. It must be fixed to the wall by means of plugs in
the all four forecasted points (see fig. 1 - 2). It can be also suspended
by chains and fastened its bottom to a plane surface through the
holes shown in fig. 3. The equipment must be fixed at a minimum
height to let the lower collecting sack be fixed in full extension.
Make it sure that the cable connection is carried out in a place pro-
tected from the rain, sprinkles and very dirty environmental site.
Make it sure that it is not too tight.
Install the equipment in a point where it can’t be of any obstacle to
the passage of things, persons, animals.
In case of use with collecting drum tighten the latter to the ground in
a point where can’t be an obstacle to the passage of things, persons,
animals.
Problems due to transport a/o accidental falls
if the fan does not turn or is in contact with external bodywork, or
if lamps won’t turn on disconnect the equipment and send it to a
service centre.
Internal installation
If you want to install the equipment internally position it at least at 2
m. of height fixing it in a shadow of the room away from windows.
External installation
To obtain the maximum efficiency, it is suggestible to hang up the
equipment at 2-3 m. from the ground. Position it at a certain distance
from the place where the animal sand persons stay, in the area of
major shadow considering the action radius (15-18 m).
Содержание 306
Страница 2: ...2 Fig 1 Fig 2 Fig 3 ...