MMF VM40C, Инструкция по эксплуатации

Страница: 11 / 22

2.5. Data Export
In the header of the display elements you will find the symbol . It is used to ex-
port the saved data to a file (Figure 10).
CSV and JSON are available as output formats. The export must be done individu-
ally for each measuring channel.
2.6. Email Alerts
AskSensors can send alert messages by email when thresholds are exceeded. To en -
able this function, click "Devices" in the AskSensors menu, then on the name of the
device, select the tab "Modules" and "Add alert" for the desired module (Figure 12).
Useful is, for example, "module6" with the warning/alarm status. If you enter “1”
under "Max value", a message will be sent in the event of an alarm (Figure 11 ).
Select "Min/Max threshold" as criterion
and enter the email address. "Check in-
terval" determines how often emails are
sent. Selectable are 15 minutes to 1
week. The sender is
admin@asksensors.com.
7
Figure 10: Data export
Figure 12: Setting up email alerts
Figure 11: Email alert example