MMF VM40C, Инструкция по эксплуатации

Страница: 12 / 22

2.7. Settings at the VM40C
To set up a connection between the VM40C and AskSensors, select "IoT/SMS/
Alarms" in the VM40C main menu, then "AskSensors" and there "Settings".
First, you specify the Access Point Name (APN). This is the name of the gateway
through which the mobile network operator provides access to the Internet. You can
find it on the mobile network operator's website. Use the arrow keys to enter the
APN. Press F1 to switch between upper and lower case letters and digits (Figure 14).
Press OK to switch to the next line or save the entry after the fourth line. Press F3 to
skip the entry.
Next, specify the "API Key In" of AskSensors. This code is used to assign the mea -
surement data sent to AskSensors to a specific AskSensors channel. In AskSensors
you will find the API Key under "Devices" after clicking on the relevant device
channel (cf. page 3). Press F1 to switch between upper and lower case letters and
numbers (Figure 15). Press OK to switch to the next line or save the entry after the
fourth line. Press F3 to skip the entry.
8
Figure 14: APN input
Figure 13: IoT menu
Figure 15: Entering API Key