MMF VM22, Инструкция по эксплуатации

Страница: 14 / 29

6.2.2. Entering the Measurement Point Text
If a measurement point has not yet been assigned a text, press F1 to reach the text-
edit menu (Figures 15 and 16).
A space of two rows consisting of 10 characters each is assigned for the measure-
ment point text. The text can be entered by pressing F1 and F2, F1 selects the char-
acter for editing and F2 the character position. Both capital letters (A to Z) and num-
bers (0 to 9) can be used. To reach the second row press OK and then to exit the
menu press OK again.
Note: More conveniently, the measurement point texts can also be entered using the
available computer software.
Once you have assigned the VMID serial number a text, the VM22 will display the
text continually upon identification of the measurement point. (17).
The measurement point text can also be changed later by following the instruction
for the initial entry. Remove the sensor from the measurement point, open the main
menu by pressing F2, scroll down to the sub menu “Point ID Memory” by pressing
F1 and OK to select. From within the Point ID Menu select “Edit Point ID”. Select
your chosen measurement point by pressing F1 and then OK to edit. The editing of
the ID text is achieved by following the instruction given for the initial entry.
12
Figure 16: ID-Text Entry
Figure 17: ID Text Display