4.
Use a 10mm Deep socket to remove the top nut off the hood prop, and loosen the second bolt a majority of the way.
5.
Slide the bracket on. Line up the holes on the top and reinstall the top bolt, tighten down the bottom bolt.
Страница 1: ...et Ratchet Small extension if needed Installation Instructions 1 Open the hood and prop it up Start on either side 2 Remove the second to last bolt on the fender 3 Install the bracket and install the bolt back into it Tighten the bolt back into the same hole it was removed from ...
Страница 2: ...mm Deep socket to remove the top nut off the hood prop and loosen the second bolt a majority of the way 5 Slide the bracket on Line up the holes on the top and reinstall the top bolt tighten down the bottom bolt ...
Страница 3: ...f the hood If the hood doesn t latch properly or doesn t sit down correctly when latched you can adjust the position of the props and of the hood bump stops When the hood is properly aligned go back and tighten down all the nuts Installation Instructions Provided by American Muscle customer Ricardo Iglesias 11 12 2012 ...
