Getting Started Guide | MMBNetworks.com/BRD21
FCC
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures: (1) reorient or relocate the receiving antenna. (2) Increase the
separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit di erent from that to which the
receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
Federal Communications Commission (FCC-US): This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
To comply with FCC RF Exposure requirements, users of this device must ensure that the device be installed and/or configured to
operate with a separation distance of 20cm or more from all persons. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
ISED
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1.
This device may not cause interference.
2.
This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1.
L’appareil ne doit pas produire de brouillage;
2.
L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
The radiated output power of this device meets the limits of FCC/ISED Canada radio frequency exposure limits. This device should be
operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a person’s body.
La puissance de sortie rayonné de cet appareil est conforme aux limites de la FCC/ISDE Canada limites d'exposition aux fréquences radio.
Cet appareil doit être utilisé avec une distance minimale de séparation de 20 cm entre l’appareil et le corps d’une personne.
European Health and Safety Compliance (CE)
The BRD21 device has been tested against the relevant harmonized/designated standards and are in conformity with the essential
requirements and other relevant requirements of the EMC-Directive (2014/30/EU) and the Radio Equipment Directive (RED) (2014/53/EU).
The products are entitled to carry the CE Mark and a formal Declaration of Conformity (DoC) is available at the product web page which
is reachable starting from https://www.mmbnetworks.com/BRD21.
UK Conformity Assessment (UKCA)
The BRD21 device has been tested against the relevant harmonized/designated standards and are in conformity with the essential
requirements and other relevant requirements of SI 2016 No. 1091 (“The Electromagnetic Compatibility Regulations 2016”) and SI 2017 No.
1206 (“The Radio Equipment Regulations 2017”).
The products are entitled to carry the UKCA Mark and a formal Declaration of Conformity (DoC) is available at the product web page
which is reachable starting from https://www.mmbnetworks.com/BRD21.
Rev 0.1 MMB Networks 2022 •
BRD21 QSG
