MLT PLYS 15, Руководство пользователя, Страница: 8 / 16

Adjust this measure to 108.5 mm.
After changing the blade, reset the support to its original position by firmly tightening the two M8 Allen screws.
Set adjustment of rollers:
NOTE:
The incorrect stroke adjustment of the rollers may cause the blade’s cutting edge to break if they are too close, or on the
contrary, may cause poor traction when using thin materials.
To adjust the height of the upper roller, adjust the M10 screw that is on the upper cover.
Screw M10
Key 17mm