ASSEMBLY INSTRUCTIONS
1. Attach one CORNER #17 to each side of one END PANEL #8 with 1/2" SCREW #4. Repeat
assembly with remaining CORNERS and END PANEL.
2. Insert pre-assembled GREEN PLAYER RODS #13 and BLUE PLAYER RODS #14 into one SIDE
PANEL #7 as shown below.
Note: To avoid confusion, it may be helpful to lay out the PLAYER
RODS in their correct order and orientation BEFORE inserting them into the SIDE PANEL
.
Although this table is assembled upside down, players are shown upright for clarity. Each
team should face the opposite goal when table is turned over - the visible screw head
indicates the front of the player. Ensure that the FOAM BUMPERS #18 and PLASTIC ROD
WASHERS #19 are in place before inserting rods into the SIDE PANELS.
3. Insert PLAYER RODS into remaining SIDE PANEL #7.
4. Slide PLAYFIELD #9 with field markings facing down into the SIDE PANEL grooves.
5