28-Port Managed Industrial Gigabit Ethernet Switch
Quick Installation Guide
11
CLI Initialization & Configuration (Optional)
1.
Connecting to MLB-E42XX-28 Ethernet port (RJ45 Ethernet port).
2.
Key-in the command under Telnet:
telnet 192.0.2.1
3.
Login with default account and password.
Username: admin
Password: admin
4.
Change the IP with commands listed below:
CLI Command:
SYSTEM RESET
The Reset button is provided to reboot the system without the need to remove power. Under normal
circumstances, you will not have to use it. However, or rare occasions, the MLB-E42XX-28 may not
respond; then you may need to push the Reset button.
enable
configure
interface vlan 1
ip-address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx
exit