MIDI LOOP L10 Instruction Manual 7
MARK L Custom Guitar Electronics
7
2.Rear Panel
The rear panel consists of 6,3 mm „jack‟ receptacles used for connecting effects, audio
signals and control the amplifier and other devices
-
LINK OUT
-feed thru on front panel output
-
INPUT 1
-Effects loop 1-6 IN
-
OUTPUT 1
-Effects loop 1-6 OUT
-
INPUT 2
-Effect loop 7-10 IN
-
OUTPUT 2
-Effects loop 7-10 OUT
-
TUNER OUT
-transformer separated TUNER out socket
-
10 x
Send
-used for connecting the effect‟s IN socket
-
10 x Return -
used for connecting the effect‟s OUT socket
-
GND/LIFT
switch used for separating ground from the housing killing the so-called
„ground loops‟
-
MIDI IN
used for Communications with a midi controller
-
MIDI OUT THRU
a MIDI bypass used for connecting and controlling (by a MIDI
SIGNAL) an additional device
- MIDI CHANNEL
switch used for switching channel from 1 to 16
-
POWER IN
Power supply socket for AC 9V/800mA
AC Plug 2,5mmx5,5mm
EXT POWER IN
for AC power converter 9VAC
AC Plug 2,5mmx5,5mm
PHANTOM POWER for FX25
