ML Accessories RDSHCBR, Инструкция по установке и обслуживанию

Страница: 4 / 5

• Replace the terminal cover and cable clamp
• Remove the bezel by unscrewing from the body of the luminaire then insert the lamp
through the fitting into the GU10 lamp holder
• Replace the bezel by screwing back onto the body of the luminaire
• Lift both spring clips on the sides of the fitting and push into the ceiling
• Switch on and check for correct operation
GENERAL
This product should be recycled in the correct manner when it reaches the end of its life.
Check local authorities for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which
may damage the product.
This luminaire is dimmable dependent on lamp type.
WARRANTY
This product has a warranty of 1 year from date of purchase. Failure to install this product
in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper
use, or removal of the batch code will invalidate the warranty. If this product should fail
within its warranty period, it should be returned to the place of purchase for a free of
charge replacement. ML Accessories does not accept responsibility for any installation
costs associated with the replacement product. Your statutory rights are not affected. ML
Accessories reserve the right to alter product specification without prior notice.