ML Accessories LEDFRA6, Инструкция по установке и обслуживанию

Страница: 4 / 8

Note – This product is able to operate at either 12V or 24V. The appropriate driver output voltage should be
selected to match the input voltage requirements of the LED load
Note – The remote requires 2 x AAA batteries (not included).
REMOTE INTERFACE
Note
–
The remote requires 2 x AAA batteries (not included).
WARNING
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
GENERAL
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the
product.
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities
for where facilities exist.
WARRANTY
This product has a warranty of 1 year from date of purchase. Failure to install this product in accordance with
the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will
invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of
purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation
costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve
the right to alter product specification without prior notice.
12V, 24V IP20, Class III, indoor only
AVDEC21_V1