4
ML Accessories Limited
LU5 5TA
www.mlaccessories.co.uk
SBDEC17_V1
GENERAL
WARRANTY
CONNECTION ACCESSORIES
The unit should be recycled in the correct manner when it reaches the end of its life. Check local
authorities for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may
damage the product.
This product has a warranty of 3 years from date of purchase. Failure to install this product in
accordance with the current edition of the IEE Wiring Regulations, improper use, or removal of
the batch codes will invalidate the warranty. If this product should fail within its warranty period it
should be returned to the place of purchase for a free of charge replacement. ML Accessories does
not accept responsibility for any installation costs associated with the replacement product. Your
statutory rights are not affected. ML Accessories reserve the right to alter product specification
without prior notice.
The LED Strip connectors can be used for reattaching the separate segments of cut-to-size strip
lights.
Compatible connectors;
• CONFLEX4P - Flexible connection joining 2 LED strips together
INSTALLATION
• Open the cap to solderless connector
• Slide the LED Flex end, with the LEDs facing
up, all the way into the solderless clamp
• Close the hinged clamp
• Ensure correct polarity on both sides as
marked on the LED Flex
CONNECTION ACCESSORIES
The LED Strip connectors can be used for reattaching the separate segments of cut-to-size strip lights.
Compatible connectors;
•
CONFLEX4P - Flexible connection joining 2 LED strips together
INSTALLATION
•
Open the cap to solderless connector
•
Slide the LED Flex end, with the LEDs facing up, all the way into the solderless clamp
•
Close the hinged clamp
•
Ensure correct polarity on both sides as marked on the LED Flex
