MKT V-2Esc, Инструкция по эксплуатации, обслуживанию и ремонту, каталог запасных частей

Страница: 13 / 39

EXCAVATOR REQUIREMENTS | 11
IV. EXCAVATOR REQUIREMENTS
A. The excavator size, stick width and pin dimensions must be compatible with the
Rototilt width, pin dimensions and size restrictions.
B. The excavator must be equipped with a uni-directional auxiliary circuit that can
supply 40 gpm to the V-2Esc at 2,500 psi. The auxiliary circuit flow must have priority
over the boom and stick functions, or greater flow and additional modifications may
be required to maintain hammer speed when operating boom or stick functions.
C. The auxiliary hydraulic circuit must supply at least 40 gpm and must flow oil in one
direction only (uni-direction), it cannot have reverse flow, or damage to the V-2Esc
hydraulic manifold may result. The circuit should be controlled by an electric on/off
switch, not a bi-directional foot pedal